Product Catalog
Company Profile
Home >> News
Tire safety warning
 Date: 2017/3/4 13:28:17  
The correct use of tire points:
The service life of tire is not only related to the manufacture of products, but also the use and management of tire. In order to achieve the purpose of safety (reduce tire failure) and economy (extend tire life), the correct use and management is not allowed to ignore and.
A. tire must be a professional installation, use special tools; radial tire and tubeless tires to use specialized machinery (dismantling machine installation), so as not to damage the tire;
B. tire components must be standard, matching, deformed, non-standard rim easily cause tire wear and tire ring burst. In case of the length and width of the rim of the rim valve, the installation should be combined with a gasket between the rim and the pad;
C. directional pattern of the tire installation to pay attention to the correct direction of travel;
D. do not fit tyre debris, sand and water, to wipe the surface of the tube on some talcum powder;
E. will generally be installed in the longitudinal transverse pattern is installed on the front wheel, rear wheel, can not have the order reversed;
F. coaxial tire can not be mixed with the radial tire tire, it is best to use the same brand of the same specification level tire; outer diameter slightly larger tires mounted on the outer;
The use of double deck G. vehicles, in the double deck two axis can not be mixed on the same meridian tire and tire, it is best to use the same brand of the same specification of tire.
A. air pressure is the life of the tire, is the safety of driving safety, tire pressure must meet the national standards for different types, specifications of the tire specified pressure;
B. should always check the tire pressure, high pressure and lack of will have special wear and groove bottom cracking, broken cord, ply delamination, tire burst damage;
C. continuous high speed, air pressure should be raised on the standard air pressure 5~10% (load tire is generally 5%);
D. tires will be elevated due to elevated temperatures caused by internal gas, gas can not be deflated at this time;
The E. tire driving, once found the leak timely stop and check (if necessary, change the spare tire), due to a serious lack of gas to prevent the tire bad.
A. tire load and pressure there is a one-to-one relationship, similar to the load of high low pressure will cause damage to the tire;
B. is often used under overload, the service life of tires will be reduced by 20%~50%;
C. the wrong way of loading, in addition to the impact of traffic safety, will also cause uneven tire load, affecting the individual tire load is too high (column load map);
A. pay attention to the tire speed level; bias tire, high level tires can not be long time driving at high speed;
B. high speed to keep the car distance, avoid unnecessary or regular braking (brake), reduce the damage to the tire;
The attention of the C. tire tread depth, close to the flat tire don't speed;
The tubeless tire should be D. high grade passenger vehicle;
E. high speed tire must be balanced detection and weight correction after installation;
A. must be timely and appropriately to the vehicle tires (to check the tires in the vehicle maintenance level and two level maintenance, keep the tire wear) uniform, prolong the service life; the diameter slightly larger tires should be installed in the outer;
B. with the pattern of four wheel or six wheel tire transposition;
C. front tire is a longitudinal pattern, the rear wheel is a transverse pattern, it should be coaxial left and right tire swap;
D. double car tires should be coaxial around the swap;
E. tire transposition, should check the tire wind situation, found that the tire has a timely repair of trauma;
A. after a long period of time (usually 1~2 hours) should take a break, check the tire;
B. avoid sudden start, emergency braking, sharp turn;
C. put an end to overloading, speeding;
D. poor road deceleration, to avoid the tire was a severe impact;
E. tires are not allowed to be used on the front wheels;
F. tire wear to wear mark, must be replaced;
G. tire failure, should be replaced immediately.
7 tire storage and storage:
A. avoid direct sunlight, avoid placing in the overheated place;
B. avoid contact with acid, alkali, oil and other organic solvents;
C. avoid close or regular contact with ozone prone equipment;
D. tires should be placed or placed on the shelf;
E. avoid tire inner water inlet.